How To Fix A Dented Garage Door

    Is your garage door not opening or stuck wide open? Need a professional technician?

    Call our garage door services in Fresno:

    ☎️ (559) 206-1995

    Or, fill this form.

    How To Fix A Dented Garage Door

    Table of Contents

    Understandably, doors are one of the characteristics of your home.

    The entryway can be fascinating without any deformations like dents.

    Nothing is more annoying than seeing as expensive as your garage door becoming damaged, ceases to function, or disturbs your daily routine.

    Dents on garage doors occur regularly.

    Fortunately, there is a simple remedy that does not require you to be a repair expert.

    Although you might call for a garage door company to undertake the work for you, taking on this job yourself will save you money.

    Before beginning, just know that if you’re living around Fresno, you can call for Joaquin Garage Doors to work on how to fix a dented garage door for you.

    We also work for garage door installation in Fresno.

    What You’ll Need

    You’d need to get the following items:

    • Wood plank
    • Rubber Mallet
    • Putty for repairs (for holes)
    • Sandpaper (or tool)
    • Paint, paintbrush, and primer

    Steps for Repairing Garage Door Dents

    When you begin, examine your garage for every dents or damage.

    You can avoid the trouble of repairing the dents, keeping your supplies, and surprisingly find out that there are more you didn’t see.

    The steps below will show you how to repair a damaged garage door.

    Maintain your well-being while taking action.

    1. Wipe out the affected area.

    The initial step is to wash the damaged area with hot water and a gentle cleaning agent, like laundry soap.

    Drop a teaspoonful of soap into a bucket half-full of warm water.

    Use sponges or a microfiber cloth to remove the dirt.

    Rinse the surface with water and allow it to dry completely.

    The door would be dry in an hour – air dry.

    2. Using a rubber mallet, tap any dented area.

    Prepare a rubber mallet and a wood plank for the following stage.

    Place the plank of wood above the bent and gently pound this with the rubber mallet to smooth out its dent area.

    This procedure does not have to be perfect.

    You still have a few steps to go before the surface is smooth down.

    Hit the damaged section as firmly as necessary to get a moderately even texture.

    3. Smooth it out with sandpaper.

    Now, grab fine-grit sandpaper and begin sanding.

    Sand all the dented surfaces, like the texture of your garage door, to make it sleeker and smoother.

    The dented surface may appear incurved with the surrounding wall.

    4. Fill up the uneven portions with putty.

    This suggests that the putty material is suitable to be used to patch up the little residual uneven section where the dent originally existed.

    If your garage door is made of wood, it is so much easier to fill up the gaps using adhesive wood putty.

    In many homes, your garage is probably made of aluminum, which is a composite material used indoors nowadays.

    All-purpose putty or one intended for automobile components application can be used in this.

    Spread the putty using your craft knife, smoothing it as much as possible.

    Review your putty material’s practical tips to find out how long it takes to dry.

    Just after the putty has dried, sand this surface again to assure that the mended part is now equivalent to the remainder of the door’s surface.

    After refinishing, clean it up by wiping dirt and sediment with a moist towel and allowing it to dry.

    5. Finish with paint.

    The last step is to repaint your door.

    But, for the paint to bond with the surface, it must first be primed.

    To guarantee that the section mixes in with the surface of the door, apply two coats.

    If you prefer not to use traditional paint for your door, spray paint might be used instead.

    This process may require additional light coats of spray paint to match the target area.

    But, this procedure helps minimize the cleanup and process time of traditional paint.

    Takeaway

    The guideline above can aid you out how to fix a dented garage door in no time if you follow it carefully.

    Never hesitate to call for professionals whenever you’re having trouble with this.

    Joaquin Garage Doors is one call away for garage door repair in Fresno.

    We work 24/7 to ensure your garage door issues will be resolved in no time.

    Here are some YouTube links to help you further.

    Restoring garage dents for Aluminum Doors
    DIY garage door dent repair.

    Rate this post