How to Select Garage Door Springs

    Is your garage door not opening or stuck wide open? Need a professional technician?

    Call our garage door services in Fresno:

    ☎️ (559) 206-1995

    Or, fill this form.

    How to Select Garage Door Springs

    Garage doors are the most commonly utilized features of the houses.

    It’s bulky and has a ton of moving components that will inevitably wear out and break.

    Once it is time to improve the torsion springs, it is strongly advised you work with a professional.

    You do have an option of having a technician repair the springs or order supply springs based on your visit.

    We’ll provide useful details in this article to help you better learn how to select garage door springs for your task.

    Joaquin Garage Doors can help you out with this one.

    We can help you identify a suitable spring for your garage door.

    Plus, we offer garage door repair in Fresno.

    What Exactly Are Torsion Springs?

    Torsion springs are among the most commonly used spring mechanisms in garage door openers.

    Torsion springs have several advantages despite being one of the costly components.

    • Long-lasting
    • Less prone to breaking
    • Simple to provide for
    • An unobtrusive style

    How Do Torsion Springs Work?

    Each end of a torsion spring has a cone.

    A stationary cone is attached with an anchored bracket over one end, and a winding cone is attached to the other.

    The winding cone is often used to mount and remove springs and to alter coil tension.

    When ordering new torsion springs, ensure that all cones are present.

    You would also need to request winding bars to attach the winding cone.

    Remember, a screwdriver can’t be utilized in place of winding bars.

    A properly functioning garage door is powered by the proper springs and cables.

    Its cables will withstand the pressure of the door, whereas the springs will supply the strength to raise and lower a properly balanced bracket.

    The springs even help your garage door opener by easing most of the tension of your door.

    How Many Springs Need Replacement?

    Many doors have a single torsion spring, while some have four.

    Once a spring falls, you can replace all of them because it’s most likely approaching the conclusion of its cycle life.

    A spring’s cycle life depends on how much it is used or how much pressure it can sustain.

    My Springs Come in a Variety of Sizes

    Whenever the garage door springs are of different sizes, make sure to choose the best match for your door.

    If you’ve calculated the correct spring size, double-check that all of the replacements suit.

    Inadequately fitted springs can cause other problems, such as an unstable lock, or seriously damage the door opener.

    How Would You Choose Torsion Springs?

    Garage door springs should be matched correctly to the weight of the door.

    Selecting springs that can withstand the weight would result in a balanced door, it can provide you:

    • Once closed, remain flat on the pavement
    • It is possible to move it halfway over or under the door
    • Have no troubles when opening

    Take the Proper Measurements

    You should be careful of the following measurements:

    • The door’s height and weight
    • The spring’s length
    • Size of the wire
    • Winding direction in the spring
    • inner circumference

    The Doors Proportions

    Use an analog weighing scale to weigh your door.

    In purchasing the spring’s total weight of a door, one can also calculate the door’s height, its cable drum count, as well as the track diameter.

    The Spring Measurements

    • Length: Calculate the spring between the first and last coil.
    • Wire Length: Measure the size of the wire throughout the spring. Place the tape measure from the first two coils, then extend it until the last coil in between the tenth and eleventh coils to determine wire length.
    • Spring Wave: Right wind springs are always on the left side of the platform, while left wind springs are on the right. Unless the edge of the springs points clockwise, this is a left-wound spring; whereas if the edge of the spring focuses counterclockwise, this is a right-wound spring.
    • Inner Diameter: Take a 1/16-inch diameter measurement. Such measurement is often written mostly on its stationary or winding cone. Usually, spring does have a 13/4-inch diameter when you notice a 1.75 upon the cone.


    Once you’ve determined the right size of your springs, you can now order it or nearby garage door solution providers.

    However, if you are uncertain if you got the correct measurements, seek an expert’s advice.

    Joaquin Garage Doors offer garage door repair as well as garage door installation in Fresno.

    We are available 24/7 to help you with your garage door issues like this.

    Check out the videos below for a more detailed process.

    How to Choose the Right Replacement Garage Door Spring:

    How to Measure Garage Door Springs:

    Rate this post
    Contact Us
    Our technicians are equipped with masks and gloves complying with health and safety regulations.
    This is default text for notification bar